7 Things You Need to Know About Basement Waterproofing for New Construction
Almost everyone has a problem with a basement that easily seeps. Indeed, it would be even worse if you have never checked in the basement. Meanwhile, if it is left too long, you will have a flooded basement. Then, the greatest risk is the foundation of the building that will falter. Therefore, the following are the 7 things you need to know about basement waterproofing for new construction.
#1. Checking the Perimeter
This is a very important thing, although most people forget about it. Well, you have to check the perimeter of your foundation. Make sure that the strain would be strong enough to accommodate the foundation, and keep the soil surface.
#2. Checking the Ground Around
Make sure that your foundation is not adjacent to moist soil. It would be easier if you have planned the concept from the beginning. But if you realize it, you should undertake preventive measures such as installing irrigation systems.
#3. Checking the Shrubs and Plants
Sometimes, the problem would be great if there are a lot of bushes near your foundation. Moreover, there are some wild plants that you might not know. They can cause the foundation to be shaken as a result of loose soil. Well, please set the appropriate distance, normally it is about 12 inches.
#4. Wall Waterproof
So, it is time to apply the waterproof system with a new protection. You can use some of the best products that can be used to coat your walls. Apply evenly and avoid any gaps.
#5. Repair the Wall
Over the years, you might not have noticed your basement. Typically, problems will arise such as cracked walls. If you find it, please immediately to fix it.
#6. Installing a Sump
It would be perfect if you install a sump. That would be an effective container for water in the ground. And this will also be easier for you to manage the water flow system under your basement. Use the proper way so that the water will actually flow up and out as it should.
#7. Perimeter Drain
If you get the bigger problem, you should use a perimeter drain. It is a very effective way to manage water, as well as prevent seepage. Everything can be managed in neat because there are sump and pump. Well, use this carefully in the appropriate sections.
Indeed, it would be very easy if you only have a small problem, but, do not overlook some of the little things that happen in your basement. Use the best ways and systems to address the problem of seepage and water in it.